Available in storeClose
The BLX120 120A waterproof ESC provides consistent power control and is 4S LiPo ready.
Fitted with super-reliable EC5 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX120 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
|Battery usage||3S LiPo (11.1V) or 4S LiPo (14.8V)|
|Low Voltage Cut-Off (LVC)||3.4V per cell|
|Thermal Protection Temperature||125°C / 257°F|
|Over-Voltage Protection||Over 17.2V|
|ESC Length||43mm / 1.69"|
|ESC Height||34mm / 1.34"|
|ESC Width||54.5mm / 2.15" (Including hold-down tabs)|
|ESC Weight||150g / 5.3 oz|
|Receiver Wire Length||170mm / 6.70"|
|Battery Wire Length||
225mm / 8.86"
|Motor Wire Length (Including Connector)||200mm / 7.87"|
|Switch Length||21mm / 0.83"|
|Switch Width||13.3mm / 0.52"|
|Switch Height||16mm / 0.63"|
|Motor Bullet Connector Size||4mm / 0.16"|
|ESC Battery Connector Type||2xEC5|